Cooling Systems

Slaughterhouse Cold Room Storage | Meat Processing & Freezing Systems

Teknotes Group provides slaughterhouse cold room storage solutions: insulated hygienic panels, cold room doors, shelving systems, chilling, shocking, and freezing systems for meat processing plants.

Slaughterhouse Cold Room Panels – Polyurethane Injected

In slaughterhouses, cold room wall panels are manufactured with polyurethane injection at a density of 40–42 kg/m³, applied between two galvanized, polyester-painted and ribbed steel sheets as standard. The surface material is not limited to polyester; it can optionally be PVC, CrNi, Plastisol or galvanized sheet. Thanks to the eccentric locking mechanism, panels are tightly locked together during assembly, ensuring minimum heat transfer in slaughterhouse cold rooms and providing hygienic meat storage.

Slaughterhouse Cold Room Floor Panels

In slaughterhouse cold rooms, floor panels are manufactured with 10 mm thick patterned plywood on the upper surface to ensure slip resistance, and 0.50 mm galvanized polyester-painted sheet metal on the lower surface as standard. On request, the upper surface can be produced with 0.5 mm CrNi sheet on OSB.

The floor panels have a load capacity of 1500 kg/m² fixed load and 200 kg/m² live load. They are available in thicknesses of 50–80–100–150–200 mm, with a fixed width of 1110 mm and lengths up to 13 meters.

Thanks to the eccentric locking mechanism, the panels are tightly locked together during assembly, ensuring minimum heat transfer in slaughterhouse cold rooms and providing hygienic and safe flooring.

SEO Keywords: slaughterhouse floor panels, cold room flooring, slip-resistant plywood panel, CrNi floor panels, meat processing cold storage systems

INDUSTRIAL SANDWICH PANELS

Slaughterhouse Cold Room Ceiling Panels

Cold room ceiling panels for slaughterhouses are manufactured as standard by injecting polyurethane with a density of 40–42 kg/m³ between two galvanized polyester-painted and ribbed sheets.

The panel surface material is not limited to polyester; it can also be produced in PVC, CrNi stainless steel, Plastisol, or galvanized sheet upon request.

Thanks to the eccentric locking mechanism, the panels are tightly locked together during assembly, ensuring minimum heat transfer in slaughterhouse cold rooms and providing hygienic storage conditions.

SEO Keywords: slaughterhouse ceiling panels, cold room ceiling panel, polyurethane insulated panel, CrNi ceiling panels, meat processing cold storage systems

Cooling Devices

HERMETIC SPLIT TYPE

Split Type Hermetic Condenser Units are suitable for cold rooms and aisle cooling with low capacity needs. Thanks to its small compact design, it is easy to install and maintain. Sound pressure values are at minimum level.

INDUSTRIAL TYPE COOLING

Industrial Type Condenser Units are suitable for industrial facilities with medium and high capacity cooling needs. Compact design, it is easy to install and maintain. Efficiency is at a high level in our cooling devices where high capacity compressors are used.

SCROLL SPLIT TYPE

Sound and vibration are at low levels in Split Type Scroll Condenser Units. It is especially suitable for market and supermarket applications. Energy consumption is at a minimum level with energy efficiency applications.

SHOCK COOLING UNITS

It is suitable for applications where long-term or short-term frozen preservation is required and products are required to be reduced below freezing temperature in a short time.

SEMI HERMETIC SPLIT TYPE

Split Type Semi-Hermetic Condenser Units are suitable for low and medium capacity cooling needs. It offers wide selection options thanks to its wide capacity ranges.

CENTRAL COOLING SYSTEMS

Central Systems are suitable for industrial cold storage facilities and supermarkets with high cooling needs. It is shipped with the condenser separate or on the system. It offers a wide selection range in capacities with 3, 4 and 5 compressors for semi-hermetic compressors and 4 to 12 compressors for scroll compressors.

Sliding Cold Room Door

HIGH ENERGY SAVING WITH RESISTANT ALUMINUM PROFILE

CTP composite construction
1.5 mm AMB (antimicrobial) FRP, painted sheet metal or stainless surface
EPDM rubber based seal system
Seamless surface when using 1.5 mm AMB (antimicrobial) FRP
Desired color option on the door leaf
Door leaf and frame are made of anodized aluminum that prevents heat transfer.
Door leaf, high pressure polyurethane injection with a density of 42 kg/m³
220 volt, 25 w/m silicon based resistance on frozen storage doors
Aluminum profile with resistance on the floor

Automatic Sliding Cold Room Door

CTP composite construction 1.5 mm AMB (antimicrobial) FRP or painted sheet metal surface
EPDM rubber based seal system
Seamless surface when using 1.5 mm AMB (antimicrobial) FRP
Desired color option on the door leaf
Door leaf and frame are made of anodized aluminum that prevents heat transfer.
Door leaf, high pressure polyurethane injection with a density of 42 kg/m³
220 volt, 25 w/m silicon based resistance on frozen storage doors
Aluminum profile with resistance on the floor
Automatic walking system, pinion-connected rack and pinion
Photocell system that prevents being locked in the room
Controlling the door with the remote control
Manual operation system in a non-electrical environment
Automatic time setting on the control panel